🔧 Metal Repair Glue – No Welding Needed🛒

🔧 Metal Repair Glue – No Welding Needed🛒

 Excellent 4.8 | 1568+ Reviews
🔧 Metal Repair Glue – No Welding Needed🛒

🔧 Metal Repair Glue – No Welding Needed🛒

$29.90
$29.90 $28.99
SAVE -4% Sold out
Metal repair epoxy before and after repairing cracked metal
Simple Metal Repair

Fix Damaged Metal Without the Welding Setup

A small crack, hole, or damaged joint doesn't always mean replacing the whole part. This two-part epoxy creates a strong repair layer that helps restore damaged metal surfaces with a much simpler at-home process.

✓ Fills Cracks & Holes ✓ Waterproof ✓ Heat Resistant ✓ Drillable After Cure
Repair instead of replacing. Ideal for everyday metal repair jobs where replacing an entire pipe, fitting, frame, or part may be unnecessary.
Three simple steps to use two part metal repair epoxy
Easy 3-Step Application

No Complicated Welding Tools Needed

Simply dispense both components, mix them thoroughly until the epoxy becomes a uniform silver-gray color, then spread it directly over the cleaned repair area.

1. Dispense 2. Mix Thoroughly 3. Apply
For best results, remove loose rust, dirt, grease, moisture, and debris from the surface before applying the mixed epoxy.
Dual plunger one to one epoxy mixing system
Built-In 1:1 Dispensing

Equal A + B Every Push

The dual-plunger design dispenses both components at the same time, helping deliver an even 1:1 ratio without having to estimate each side separately.

✓ Dual Chamber ✓ 1:1 Ratio ✓ Less Guesswork
Important: After dispensing, mix both components together completely until you have one consistent silver-gray paste before applying it to the repair.
Metal repair epoxy resistant to water heat corrosion and impact
Built for Demanding Repairs

Made to Handle Harsh Conditions

Once properly mixed and cured, the epoxy is designed for demanding metal repair environments where exposure to water, temperature changes, corrosion, and everyday impact can be a concern.

Water Resistant -55°C to 220°C Corrosion Resistant Impact Resistant
Especially useful for repairs involving metal pipes, exhaust components, outdoor metal surfaces, and other demanding DIY jobs.
Cured metal repair epoxy can be sanded drilled and painted
Finish It Your Way

Repair First. Refinish After Cure.

The repair doesn't have to end with a rough patch. After the epoxy has fully cured, the repaired area can be worked and refinished to better match the surrounding surface.

✓ Sand ✓ Drill ✓ Machine ✓ Paint
Smooth the cured surface, drill it when your project requires it, or paint over the repair for a cleaner finished appearance.
Multiple applications for metal repair epoxy glue
Versatile Repair Solution

One Epoxy. Many Repair Jobs.

Keep it ready for the small metal problems that appear around the garage, workshop, vehicle, or home. Instead of buying a different repair product for every job, one two-part epoxy can handle a wide variety of metal surfaces.

Exhaust Pipes Metal Water Pipes Doors & Window Frames Auto & Metal Parts
Repair more. Replace less. A practical addition to a garage, toolbox, workshop, or DIY repair kit.

Frequently Asked Questions

Quick answers to the most common questions before you start your repair.

Do I need a welding machine to use this?
No. This is a two-part epoxy repair compound designed to be mixed and applied directly to prepared surfaces. No welding torch or welding machine is required for application.
Do I need to measure the two components myself?
The dual-plunger cartridge is designed to dispense Part A and Part B together in an approximately 1:1 ratio. You should still mix the two components thoroughly before applying.
What color is the glue after the two parts are mixed?
The two components come out separately. After they are thoroughly mixed together, the working epoxy should become a uniform silver-gray mixture.
What surfaces should I prepare before applying it?
For better adhesion, the repair area should be clean and free from loose rust, paint flakes, oil, grease, dirt, dust, and standing water. Lightly roughening a very smooth metal surface can also help create a better bonding surface.
Can I use it on exhaust pipes?
It is designed for metal repair applications including exhaust pipes and other metal components. The stated operating temperature resistance is approximately -55°C to 220°C. Always make sure the repair location stays within the product's intended temperature and mechanical limits.
Is the cured repair waterproof?
Once correctly mixed, applied, and fully cured, the epoxy is designed to provide water-resistant sealing for suitable metal repair applications.
Can I sand or drill the repaired area?
Yes. After the epoxy has fully cured, the repaired area can be sanded, drilled, machined, or painted as needed.
Can I apply it and immediately use the repaired part?
No. The epoxy needs adequate time to cure before the repaired area is placed under load, exposed to high temperatures, drilled, sanded, or put back into normal service. Cure time can vary with temperature, application thickness, and working conditions.
Can it replace professional welding in every situation?
No repair adhesive should be treated as a universal substitute for structural welding. This product is best suited to appropriate cracks, holes, sealing, filling, and general metal repair jobs. Safety-critical or heavily load-bearing components should be evaluated and repaired using the correct professional method.
Where can I use it?
Typical applications include exhaust components, metal pipes, metal water-pipe fittings, doors, window frames, automotive metal components, workshop equipment, and other suitable metal surfaces.

Small Metal Damage Doesn't Always Mean Replacement.

Keep a simple two-part metal repair solution ready for the cracks, holes, leaks, and damaged metal surfaces that show up around the home, garage, workshop, and vehicle.

View full details